About This Guide - Ruckus Wireless SmartCell 200 Reference Manual

Wireless gateway s2a interface smartzone 3.4

Hide thumbs Also See for SmartCell 200:

Table of Contents

About This Guide

This SmartCell Gateway™ (SCG) 200 S2a Interface Reference Guide describes the

interface between the SCG and the Packet Data Network Gateway (PDN-GW). It

also describes the control plane GPRS (General Packet Radio Service) tunneling

protocol messages.

This guide is written for service operators and system administrators who are

responsible for managing, configuring, and troubleshooting Ruckus Wireless

devices. Consequently, it assumes a basic working knowledge of local area

networks, wireless networking, and wireless devices.

NOTE

If release notes are shipped with your product and the information there

differs from the information in this guide, follow the instructions in the release notes.

Most user guides and release notes are available in Adobe Acrobat Reader Portable

Document Format (PDF) or HTML on the Ruckus Wireless Support Web site at

https://support.ruckuswireless.com/contact-us.

SCG™ 200 S2a Interface Reference Guide for SmartZone 3.4, 800-71172-001 Rev A

Table of Contents

Do you have a question about the SmartCell 200 and is the answer not in the manual?