The Functions; File - Ericsson EF738 Service Manual

Test/Service Programs

The Functions

NOTE! Defaults are printed in italic.

File

The 'File' sub-menu includes the functions listed below:
File
Read
Burn
Verify
Save
Load
Reset PIN
Activate DRX
Deactiv. DRX
EXit
Read
Burn
Verify
Save
Load
Reset PIN
Activate DRX
Deactivate DRX Deactivates the Discontinuous Reception feature.
Exit
20
Alt F1
Alt F2
Alt F3
Alt F5
Alt F6
Alt F7
Alt F8
Alt F9
Alt X
Transfers the contents of the EEPROM to the computer memory.
CAUTION! When using this function, make sure to reload the
configuration file before programming other phones, as incor-
rect data inadvertently might be programmed.
Programs the phone with the Subscriber, Country and System
data that has been entered into the PC memory.
Comparison between the PC memory and the phone.
This command has two different functions:
1. Creates a configuration file which is automatically loaded at
each program start.
The file name must be manually changed to TYPE1361.CNF.
All data from the edit windows are saved.
Guarantee Start is set to 'today's date' by the system clock.
2. Saves the data in the phone before service.
Data in the edit windows is saved if the file name is other
than TYPE1361.CNF.
Default name is STATION1.SAV.
Reloads a configuration file.
Resets the PIN to 0000.
Activates the Discontinuous Reception feature.
CAUTION! May deteriorate the performance of the phone,
if DRX is not supported by the system
Quit the program.