Ericsson EF738 Service Manual page 108

Reassembly
1. Place a front cover (2) on the workbench
2. Carefully place the board (1) into the front cover with the shield can upwards.
3. Drop a screw (10) into the upper right corner hole in the board.
4. Drop an antenna connector (7) into the placement cavity of the antenna connec-
5. Drop a screw (6) into the screw hole in the antenna connector.
6. Mount the back cover (13) on the front cover (12).
7. Drop the four screws (14) into the holes on the back cover.
8. Mount the antenna by screwing it clockwise into the thread.
9. Insert the battery pack into the phone and push until a click is heard.
Assemble the keypad (4).
NOTE! Do not touch the display with your fingers
Tighten the screw with a screwdriver (0.15Nm).
tor placement guide.
Ensure that the locating posts of the antenna connector are positioned in the mat-
ing holes of the board.
Tighten the screw with a scredriver (0.15Nm).
Hold down the lower part of the back cover against the front cover and press the
upper part of the phone together.
Tighten the screws with a screwdriver (0.15Nm).
Service Instructions
7