Valet Mode - Directed Electronics 1090 Owner's Manual

" remote " When exiting Valet mode, the remote control
Notification will be two beeps and the Disarm animation.
Use the following methods to enter and exit Valet mode.
valet switch:
a.
b.
c.
d.
remote control:
1. Open any door.
2. Press
3. Press
4. Press
�������
�������

Valet mode.

5. The led will turn on when entering and off when exiting
�������
Valet mode.
© 2 0 0 6 d i re c t e d e le c t r on i c s— a l l r ig ht s r es e r v e d
Turn the ignition on for 5
seconds
Turn the ignition off
Within 10 seconds press and
release the Valet switch once
The led will turn on when
entering and off when exiting
Valet mode
button, the system will arm.
immediately, the system will disarm.
button immediately, the system will enter/exit
DRW-35