Ford RANGER 2015 Body And Equipment Mounting Manual page 51

• For auxiliary customer electrical loads, a
suitable fused connection must be used.
• If multiple auxiliary loads are required, it is
recommended that an auxiliary fuse box is
fitted to the vehicle.
• For the connection of auxiliary exterior lighting,
refer to the guidelines given in the exterior
lighting section.
Refer to: 4.3 Exterior Lighting (page 63).
IG+ Connection at Body Control Module
Item
1 Body Control Module
2 IG+ Feed
Part Numbers
Description
Connector
Pin
FORD RANGER 2015
Auxiliary loads for external devices which require
an ignition feed (such as UHF/CB radios) may be
connected via a relay energised by a IG+ feed to
the Body Control Module.
The Body Control Module is positioned on the
driver's side of the vehicle underneath the dash
panel.
Description
Part Number / Service
Part Number
CU5T-14489-XA
7C3T-14474-DA / DU2Z-
14474-DA
WARNING: Under no circumstances
should the IG+ feed be used to drive
auxiliary loads directly. A suitable relay
must be used.
Manufacturer
TE (Tyco Electronics)
Molex
Date of Publication: 02/2017