Ford RANGER 2015 Body And Equipment Mounting Manual page 50

Under no circumstances should any
unfused connections be made directly
to any of the vehicle's battery terminals.
An increase in battery drain due to an
auxiliary load will void the battery
warranty.
NOTE: Auxiliary loads must always be connected
to the vehicle ground and not to the battery
negative terminal.
• For auxiliary customer electrical loads, a
suitable fused connection must be used.
• If multiple auxiliary loads are required, it is
recommended that an auxiliary fuse box is
fitted to the vehicle.
• For the connection of auxiliary exterior lighting,
refer to the guidelines given in the exterior
lighting section.
Refer to: 4.3 Exterior Lighting (page 63).
IG+ Connection at Body Control Module
Item
1 Body Control Module
2 IG+ Feed
Connection of Auxiliary Loads - High
Level Vehicles
WARNINGS:
Make sure all electrical connections and
wiring comply with regulations stated in
ADR 42/04 Clause 9.
FORD RANGER 2015
Auxiliary loads for external devices which require
an ignition feed (such as UHF/CB radios) may be
connected via a relay energised by the IG+ feed
to the Body Control Module.
WARNING: Under no circumstances
should the IG+ feed be used to drive
auxiliary loads directly. A suitable relay
must be used.
The Body Control Module is positioned on the
driver's side of the vehicle underneath the dash
panel.
Description
Under no circumstances should any
unfused connections be made directly
to any of the vehicle's battery terminals.
NOTE: Auxiliary loads must always be connected
to the vehicle ground and not to the battery
negative terminal.
Date of Publication: 02/2017