Trailer Brakes (High Level Vehicles) - Ford RANGER 2015 Body And Equipment Mounting Manual

Stop Lamp Circuit Feed
Item
1 Brake Pedal Assembly
2 Stop Lamp Switch
3 Stop Lamp Signal - Connector C278, Pin 1. +12V when brake pedal is pressed
If electric trailer brakes are to be installed, they
can be triggered by the stop lamp switch. The
maximum additional load is 1A.
2.2.4 Trailer Brakes (High Level
Vehicles)
WARNINGS:
Ford is not responsible for warranty or
performance of aftermarket brake
controllers including during misuse or as
a result of customer installation.
FORD RANGER 2015
Description
Do not use the adaptive cruise control
system when towing a trailer with
electric brake controls. Aftermarket
electric trailer brakes will not operate
when you switch the system on because
the brakes are electronically controlled.
Failure to do so may result in loss of
vehicle control, which could result in
serious injury or death.
Date of Publication: 02/2017