Body; Body Structures - General Information; Integrated Bodies And Conversions - Ford RANGER 2015 Body And Equipment Mounting Manual

Hide thumbs Also See for RANGER 2015:
Table of Contents

Advertisement

5.1 Body

5.1.1 Body Structures - General
Information
WARNING: All external or internal
projections must comply with ADR
42/04, Clause 11.
CAUTION: Load carrying structures
should not be mounted onto an existing
load tray or load box.
When carrying out vehicle
conversions/modifications the following points
should be considered:
• Make sure that the vehicle structural integrity
is maintained.
• Do not drill into closed frame body members.
• Make sure that the design for the body
alterations or additional structure disperse the
load evenly.
CAUTION: Uneven load distribution
could result in unacceptable handling
and braking characteristics.
FORD RANGER 2015
• Re-paint metal edges after cutting or drilling.
All metal edges must comply with exterior and
interior protection legislation.
• All fixings through the floor, sides or roof must
be sealed.
• Make sure that fixings in the 'B'-pillar area do
not encroach on the seat belts or seat belt
reels.
5.1.2 Integrated Bodies and
Conversions
WARNING: All wheelhouse envelopes
must comply with ADR 42/04, Clause 14.
For integral structures such as ambulances or
motor-homes with increased rear overhang built
onto the chassis the following applies:
• Reduced departure angles, e.g. rear entry step,
should be discussed with the end user /
customer. Consider removable components
to avoid damage on ferries or low-loaders.
• Unique spare wheel stowage may be required
if obscured by rear step, check for accessibility.
• The recommended dimensions for
wheelhouses on conversions are outlined in
the following figure.
Date of Publication: 02/2017

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents