Controls And Features - PhoneMate PM2420 Installation And Operating Manual

PM2420Manual_En 2005.2.5 1:21 PM ˘ ` 9

CONTROLS AND FEATURES

1 Talk
The Talk is used to access the telephone
line or end a call.
Caller ID Key (CID)
2
The Caller ID key is used to recall and
review the Caller ID information stored
in Memory. The PM2420 stores up to
40 Names and Numbers.
Redial Key (REDIAL/DELETE)
3
When the phone is off-hook, press
Redial key to redial the last number
dialed. The REDIAL/DELETE key is also
used to erase digits and single or multiple
entries in the PhoneBook and Caller ID log.
Redial is also used to insert a measured
pause into a number stored
in the phone book.
Channel Key (CH)
4
The CH key, if pressed when the line is
off-hook, will scan up to 40 channels
and select the clearest one to provide
the best possible reception.
5 MUTE/PROG Key
The Mute/Prog key is used to temporarily
mute the handset microphone. It is also
used to access the programmable
functions of your telephone.
Dial Pad
6
Numeric keys are used in the
conventional manner for dialing.
FLASH/EDIT Key
7
The Flash key is used to access telephone
company services, such as call waiting. It is
also used to enter or edit entries in the
Phone Book.
8
AGFA SelectSet Avantra 25
MEM/SAVE Key
8
Use the MEM/SAVE key to program and
retrieve the numbers in the speed dial
directory. The MEM/SAVE key is also used
to save other programmable settings as
well as store numbers into the Phone
Book.
Temporary Tone/View Left Key
9
If the base is set to pulse dialing, pressing
causes subsequent digits to be
dialled out using tone until the line is put
back on hook. It is also used to scroll the
left part of the display and move the
cursor left when editing or programming.
14
2
7
8
12
12
1
3
13
6
10
9
5
11
4
CONTROLS AND FEATURES
10 View Right Key
The View Right Key is used to scroll
the right part of the display as well as
move the cursor right when editing or
programming.
Ringer Switch
11
The RINGER switch is used to adjust the
handset ringer level between Off, On.
VOL/SCROLL
12
The key allows you to scroll through
the logs and menus as well as adjust the
handset volume.
CALL BACK KEY
13
Used for changing from 10 to 11 digit
dialing.
New Call Indicator
14
When there are new calls that have not
been reviewed on the Caller ID display,
this Indicator will flash. If you subscribe to
any Voice Mail service that maybe offered
by your local Telephone company, it will
also flash when there are new messages
that you have not heard.
Model PM2420
9