Table of Contents
Advertisement
PM2420Manual_En
2005.2.5 1:22 PM
˘
` 19
SETTINGS
Changing the Language
1.
Press and hold the MUTE/PROG key.
2.
Press 1 to access the language option.
3.
Press the FLASH/EDIT button to change the setting. "ENGLISH" will begin flashing.
4.
Use the scroll keys
to change between ENGLISH, ESPANOL, and FRANCAIS.
5.
When the setting you want appears, press MEM/SAVE to save the selection. A
double beep will be heard to confirm the selection has been saved.
6.
Press MUTE/PROG to exit, or continue programming other settings.
Turning the First Ring On or Off
Allows you to turn the first ring off, so that the phone does not ring until the Caller ID
information is displayed.
1.
Press and hold the MUTE/PROG key.
2.
Press "2" to access the First Ring option.
3.
Press FLASH/EDIT button to change the setting. "On" will flash in the display.
4.
Using the scroll keys
keys, choose either On or Off.
5.
Once you have selected the setting, press the MEM/SAVE button to save the
selection. A double beep will be heard to confirm the selection has been saved.
6.
Press MUTE/PROG to exit, or continue programming other settings.
18
AGFA SelectSet Avantra 25
SETTINGS
Setting the Time and Date
1.
Press and hold the MUTE/PROG key.
2.
Press "3" to access the TIME SET option.
3.
Press the FLASH/EDIT button to change the selection. The month will start to flash.
4.
Use the key pad to enter the month using 2 digits. For example January would be
"01". The date will start to flash.
5.
Use the key pad to enter the date using 2 digits. For example the first would be
"01". The hour will start to flash.
6.
Use the key pad to enter the hour using 2 digits. The minutes will start to flash.
7.
Use the key pad to enter the minutes using 2 digits. AM and PM will start to flash.
8.
Use the "1" button on the key pad to select AM and the "2" button on the key pad
to select PM.
9.
The time and date are now set. A double beep will be heard to confirm the selection
has been saved. Press MUTE/PROG to exit, or continue programming other
settings.
Adjusting the Contrast of the Display
1.
Press and hold the MUTE/PROG key.
2.
Press "4" to access the Contrast option.
3.
Press FLASH/EDIT button to change the setting. "2" will
flash in the display.
4.
Using the scroll keys
, choose between the 3 levels of contrast.
5.
Once you have selected the setting, press the MEM/SAVE button to save the
selection. A double beep will be heard to confirm the selection has been saved.
6.
Press MUTE/PROG to exit, or continue programming other settings.Setting the
PBX Number
Model PM2420
19
Advertisement
Table of Contents
