Table of Contents
Advertisement
PM2420Manual_En
2005.2.5 1:22 PM
˘
` 33
OTHER FEATURES
Using the Handset Finder (PAGE)
1.
Press Page on the base. If the handset is within range, a triple beep will sound for
50 seconds.
2.
Place the handset back into the base or press the TALK key on the handset to stop
the page/find feature.
Security Code
The security code prevents your cordless telephone conversation from being accessed by
a phone on a different line. Once the handset battery is fully charged, the handset will
automatically select the code from a total of over 65,000 combinations. The code is
changed every time the handset is placed in the cradle (indicated by a beep).
If you experience difficulty with placing or receiving calls, a lost security code may be the
cause of the problem. When this occurs, the handset can no longer communicate with
the base. Reset by placing the handset on the base for 5-10 seconds. If that does not
work, unplug the AC adapter from the wall outlet. Disconnect the handset battery for 5-
10 seconds and then reconnect. Place the handset back on the base and then replug the
AC adapter.
Channel Changing
If you are experiencing interference during a telephone call, press the CH key. The Unit
will scan up to 40 channels and select the clearest one to provide the best possible
reception.
Out of Range Warning
If the handset is moving too far away from the base, the handset will beep and the
display will show "OUT RANGE". Move closer to the base to maintain the connection on
your phone call. Otherwise, the call maybe disconnected. If you try to access the line
while the handset is out of the range of the base, the display will show "TRY AGAIN".
32
AGFA SelectSet Avantra 25
CARE AND MAINTENANCE
Your PhoneMate PM2420 telephone has been designed to give years of trouble-free
service. It is a sensitive electronic instrument. To assure its longevity, please read the
following maintenance instructions.
1.
Keep the PM2420 away from heat as high temperatures can shorten the life of the
electrical components and distort or melt its plastic parts.
2.
The PM2420 should be kept free of dust and moisture. If it gets wet, wipe it dry
immediately. Liquids can contain minerals that can corrode electronic circuits.
3.
Handle your PM2420 gently and carefully. Dropping it can cause serious damage to
circuitry, or the plastic case, which may result in malfunction.
4.
Do not use any type of chemical or any abrasive powder to clean the cabinet. Use
only mild detergents on a soft damp cloth to clean the PM2420 telephone.
5.
The PM2420 has built-in surge protection circuits that meet or exceed FCC
requirements. However, an incident such as a lightning strike at or near the
telephone lines, could cause serious damage.
6.
If the PM2420 is installed in an area with frequent or severe electrical storms, it is
suggested that the telephone be disconnected during these storms or that
additional surge suppression equipment be added to the installation.
7.
In the case of trouble with the telephone, do not attempt to repair the telephone
yourself. It is the responsibility of users requiring service to report the need for
service to our Service Department. They will make the necessary arrangements for
repair or replacement.
8.
If you should have any questions regarding the operation of your PhoneMate
PM2420, please visit our web site: www.phonemate.com
9.
Please register your product by mailing in the Product Registration form included
with your PhoneMate PM2420
Model PM2420
33
Advertisement
Table of Contents
