Safety & Operation Decals - Briggs & Stratton Simplicity Axion CZT2142 Operator's Manual

Axion / 150z series ride-on mower
Table of Contents

Advertisement

SAFETY & OPERATION DECALS
This unit has been designed and manufactured to
provide you with the safety and reliability you would
expect from an industry leader in outdoor power
equipment manufacturing.
Although reading this manual and the safety instructions
it contains will provide you with the necessary basic
knowledge to operate this equipment safely and
effectively, we have placed several safety labels on the
unit to remind you of this important information while you
are operating your unit.
Decal - Amputation and
Thrown Objects Hazard
(33" Decks)
Part No. 7101665
DANGER
Amputation and thrown objects hazard
Keep hands and feet
away from deck.
Do not operate mower
unless discharge chute
or entire grass catcher
is in its proper place.
7101665
Decal - Amputation and
Thrown Objects Hazard
(42 & 50" Decks)
Part No. 1704277
DANGER
Amputation and
Thrown Objects Hazard
To avoid injury from rotating blades and
thrown debris, stay clear of deck edge
and discharge. Do not mow without
deflector or entire grass catcher in place.
Decal - Operation, Upper
Part No. 7102575
To Turn On the Mower Blades:
To Stop the Engine:
1. Sit in seat.
1. Move ground speed levers to
2. Start the engine (see "To Start Engine").
START/PARK.
3. Pull the mower blade switch UP to
2. Move parking brake lever to
turn the mower blades ON.
ENGAGE position.
3. Move engine speed control
to SLOW.
To Drive:
4. Turn ignition switch to OFF.
1. Start the engine (see "To Start Engine").
2. Move parking brake control to
To Turn the Mower Blades Off:
DISENGAGE position.
1. Push the mower blade switch DOWN to
3. Move both ground speed levers in from
turn the mower blades OFF.
PARK position.
4. Move levers as shown to travel.
3
1
Sit in the seat.
2
Move the ground speed levers to ST ART/PARK
positions (move both levers out).
3
Move par king brake control to ENGA GE position.
4
Turn the mo wer blades OFF (push switch down).
5
Move the throttle/choke control to the
CHOKE position.
6
Turn ignition switch to ST ART to crank the engine .
7
After the engine star ts:
-release the ignition switch key (it will return to RUN position)
-move the throttle/choke control to the F
AST position for
maximum engine speed
Always set the engine speed to F AST for mowing .
Decal - Operation, Lower
Part No. 7103185
Decal - Tracking
Adjustment
Part No. 1726638
Decal - Ground
Speed Lever
Part No. 7102576
Forward
Neutral
Reverse
7102575
5
6
4
7103185
7102578
Decal - Parking Brake
Part No. 7102578
1733458
Decal - Cutting Height
Indicator
Part No. 1733458
All DANGER, WARNING, CAUTION and instructional
messages on your rider and mower should be carefully
read and obeyed. Personal bodily injury can result when
these instructions are not followed. The information is for
your safety and it is important! The safety decals below
are on your rider and mower.
If any of these decals are lost or damaged, replace them
at once. Contact your dealer for replacements.
These labels are easily applied and will act as a constant
visual reminder to you, and others who may use the
equipment, to follow the safety instructions necessary for
safe, effective operation.
Decal - Cutting
Height Switch
Part No. 1734276
Right Ground
RAISE
Speed Lever
MOWER
(Controls Right Drive Wheel)
Cutting
Start / Park
Height
LOWER
MOWER
7102576
1734276
1734276
High Cut
DANGER
4
3
Amputation Hazard
To avoid injury from rotating
blades, stay clear of deck edge.
2
Decal - Amputation Hazard
(42 & 50" Decks)
1
Part No. 1704276
Low Cut
DANGER
Amputation and thrown objects hazard
Keep hands and feet
away from deck.
Do not operate mower
unless discharge chute
or entire grass catcher
is in its proper place.
Decal - Amputation and
Thrown Objects Hazard
(33" Decks)
Part No. 7101665
8
Decal - Control Panel
Part No. 7103082
Decal - Hot Surfaces
Part No. 1734273
(Located on RH side)
WARNING
Burn hazard
The exhaust pipe and surrounding
surfaces are hot and can cause
burns.
Avoid contact with hot surfaces.
Decal - Cutting Hazard
Part No. 1734672
(Located on rear frame)
7103082
Decal - Transmission
Release
Part No. 1734532
(Located on rear frame)
Left Ground
Forward
Speed Lever
(Controls Right Drive Wheel)
Start / Park
Neutral
Reverse
174xxxx
Decal - Ground Speed Lever
Part No. 1734270
1704276
7101665

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents

Save PDF