Default Settings - Vent-Axia 405215 Installation And User Manual

Technical data

Default settings

Parameters
Commissioning Screens
Country
Language
Date
Time
Unit configuration
Filter Check
Summer Bypass
Mode Names
User Mode
Boost Supply/Extract
Normal Supply/ Extract
Low Supply/Extract
Purge Supply/Extract
Internal RH Mode
Internal RH Setpoint
Control Mode
Frost Protection
Mode schedule 1
Mode Schedule 2
Service Phone
Set Lock code
Indoor Temp
Outdoor Temp
Boost Over-run
Boost Overrun set time
Boost Delay
Boost Delay set time
LS1/LS2/LS3
SW1/SW2/SW3/SW4/SW5
Vent-Wise 1/2/3/4
Proportional 1/2
Table 2 Default settings
The touch screen controller consumes 0.5 Watts in stand-by mode when fitted to the MVHR unit. If required this controller
may be removed from the unit and stored separately, further minimising the overall energy consumption.
62
Settings
United Kingdom
English.
Automatic - Factory set
Automatic GMT/BST - Factory set
Right Hand
12 months
Normal
Normal, Boost, Low, Purge
50 %
30 %
20%
100%
On
70%
Normal
Airflow Mode
All days set to 0:00 (on), 00:00 (off) – inactive
All days set to 0:00 (on). 00:00 (off) – inactive
Not Set
0000
25 C
14 C
Off
15
Off
00
User Mode 3 (Boost)
User Mode 3 (Boost)
User mode 3 (Boost)
Load Pot (60 %)
Time Pot (20 m)
Humidity – Boost, Normal (60 %)
CO2 – Boost (2000 ppm), Normal (1000 ppm)
Temperature – Boost (27 C, Normal (17 C)
MVHR Installation and User Guide 476930