Commissioning The Unit Via Usb - Vent-Axia 405215 Installation And User Manual

Commissioning the Unit via USB

When carrying out commissioning on multiple similar installations, commissioned settings may be downloaded and
saved onto a USB at the end of the setup routine (see page 34). They can then be uploaded onto subsequent units
saving time on site. The option to upload the settings is available at the beginning of the commissioning quick start
menu (see page 25).
No two systems are exactly the same and the settings and flow rates at each installation should be verified.
The USB does not have to be blank however only the most recent file will be read.
MVHR Installation and User Guide 476930
Commissioning
41