Onie Activation - Lenovo ThinkSystem NE2572 Quick Start Manual

ONIE Activation

1. Connect to the device as shown in
2. During the startup procedure, press either the Delete or the Esc key to enter the
12
Lenovo ONIE Quick Start Guide for NE2572
The ThinkSystem NE2572 RackSwitch comes out of the box with ONIE
pre-installed, however it is disabled by default. To activate ONIE on the switch, use
the following steps:
boot up the switch.
Note: If the device is already up and running, reload the switch using the
following commands:
NE2572> enable
NE2572# reload
Basic Input/Output System (BIOS) menu.
INIT: reboot: Restarting system
...
Press <DEL> (Terminal Not applicable) or <ESC> to enter setup...
The BIOS menu appears on screen.
"Connecting to the NE2572" on page 6 and then