Setting The Date And Time - JDS Uniphase OneExpert DSL User Manual

The System Settings menu appears.

Setting the date and time

The first selection on the System Settings menu is Date and Time. The OneExpert DSL has an
internal clock that you can set to provide accurate time stamps for test results.
The following procedure describes how to set the date and time.
To set the date and time
1 From the System Settings menu, select Date and Time.
The Date and Time Settings menu appears.
2 Set the time by touching Time, turning the dials, and then touching Set.
3 Set the date by touching Date, using the arrows to set the month and year, touching the day
on the calendar, and then touching Set.
4 Specify the Date Format by touching Date Format and then selecting either MM/DD/YYYY or
DD/MM/YYYY format.
5 Specify the Time Format by touching Time Format and then selecting either 12 Hour or 24
Hour.
6 To change the Time Zone, touch Time Zone and then select your time zone.
7 If Daylight Savings Time (DST) is used in your area, touch DST Used to add a check mark.
8 If Time Synchronization is needed, touch Time Synchronization and then select NTP. If not
needed, set Time Synchronization to None. Network Time Protocol (NTP) synchronizes your
system clock with a central time server.
April 2014
OneExpert DSL User's Guide
22052280, Revision 001
Chapter 3 Utilities
Specifying system settings
17