Table of Contents
Advertisement
6.
To install the roof hoop (cars without a sunroof)
0
30
0
0
30
0
31
Retrofit / Installation kit No. 82 82 0 304 134 (others see cover sheet)
Installation Instructions No. 01 29 0 141 494
039 0226 B
5
31
039 0227 B
5
31
039 0228 B
30
8
039 0229 B
Issue date: 05.2003
0
The figure shows the roof area behind the B
pillar on the left-hand side of the car. Proceed
in exactly the same way on the right-hand
side.
Unclip the mounting point for the rear handle (30).
0
Direction of arrow = Driving direction.
Place the roof hoop (5) in the car as illustrated.
30
Place the roof hoop (5) on the left-hand side of the
car with its front edge against the fixing lug for the
head airbag (30), push it upwards and mark the
fastening holes (31).
0
Direction of arrow = Driving direction.
Place the roof hoop (5) in the car as illustrated.
Place the roof hoop (5) on the right-hand side of
the car with its front edge against the fixing lug for
the head airbag (30), push it upwards and mark the
fastening holes (31).
0
The figure shows installation of the threaded
rivets on the left-hand side of the car.
Proceed in exactly the same way on the right-
hand side.
When drilling, use a vacuum cleaner to suck
up all chips and swarf.
Drill the holes, 7 mm diameter, at the markings
(30). Deburr the edges of the holes. Push threaded
rivets M5x13.5 (8) into the holes and fix in place
with threaded rivet pliers.
EN/11
Advertisement
Table of Contents
