Remote Control Code In Service Factory Mode - Pioneer PDP-5020FD Service Manual

5

[4] REMOTE CONTROL CODE IN SERVICE FACTORY MODE

Remote Control Keys
MUTING Switching the main items.
j (DOWN)
Switching the subtitled items.
i (UP)
Switching the subtitled items.
k (LEFT)
Decreasing the adjustment value.
l (RIGHT)
Increasing the adjustment value.
ENTER/SET Switching the layers.
INPUT Selecting INPUT.
INPUTxx Selecting INPUT.
CH+/P+ Increasing the channel number.
CH-/P- Decreasing the channel number.
Numeric Keys Function: TV
POWER Power OFF.
Factory OFF (Factory mode)
FACTORY
Factory ON (Non-Factory mode).
HOME MENU Menu ON.
VOLUME+ Volume UP.
VOLUME- Volume DOWN.
DRIVE OFF (Note1) Drive Mode OFF.
INTEGRATOR INTEGRATOR MENU ON.
(Note 1) When ten seconds have passed since the [DRIVE OFF] key was pressed at the standby, it becomes invalid.
Please press [POWER] key from the [DRIVE OFF] key pressing within ten seconds when you do power supply ON while
driven OFF.
5
6
Basic Functions
Shifting to the next main item (top).
Shifting downward to the next subtitiled item.
Shifting upward to the next upper layer.
Decreasing the adjustment value.
Increasing the adjustment value.
Shifting downward or upward to the next lower or upper layer.
Shifting the INPUT to the next function.
Switching the INPUT to xx. (xx=1 to 7 etc)
Function: TV (previously selected channel number is selected)
Turning the power off.
In Factory mode, turning Factory mode off.
In Non-Factory mode, turn Fuctory mode on.
In Factory mode, turn Factory mode off.
Increasing 10 the adjustment value. (PANEL FACTORY)
Decreasing 10 the adjustment value. (PANEL FACTORY)
Turning Drive mode off.
Enter INTEGRATOR MODE.
PDP service
remote control
PDP-5020FD
6
7
Remarks
Supplied
remote control
7
8
A
B
C
D
E
F
113
8