Pioneer PDP-5020FD Service Manual page 116

1
A
Large Item
Middle Item
6.2 [2] PANEL FACTORY (+)
[2-8] ETC. (+)
B
[2-9] RASTER MASK SETUP (+)
[2-10] PATTERN MASK SETUP (+)
[2-11] COMBI MASK SETUP (+)
6.2 [3] OPTION
C
[3-1] CH PRESET <=>
[3-2] ANTENNA MODE <=>
[3-3] AFT <=>
[3-4] SYNC DET (+)
[3-5] CTI (+)
[3-6] CC (+)
6.2 [4] INITIALIZE
[4-1] SIDE MASK LEVEL (+)
[4-2] FINAL SETUP (+)
[4-3] DTB SERVICE MODE (+)
[4-4] Wide XGA AUTO <=>
[4-5] AUTO ADJUSTMENT (+)
D
E
F
116
1
2
Variable / Adjustment Range
Small Item
BACKUP DATA <=> NO OPRT <=> TRANSFER/ERR
DIGITAL EEPROM <=> NO OPRT <=> DELETE/REPAIR
PD INFO. <=> NO OPRT <=> CLEAR
SD INFO. <=> NO OPRT <=> CLEAR
HR-MTR INFO. <=> NO OPRT <=> CLEAR
PM/B1-B5 <=> NO OPRT <=> CLEAR
P COUNT INFO. <=> NO OPRT <=> CLEAR
MAX TEMP. <=> NO OPRT <=> CLEAR
MIRROR <=> OFF <=> MODE1 to MODE3 <=>
CLS <=> OFF <=> ON
MASK OFF
RST MASK 01 <=> <=> 50V <=> 60V <=> 60P
<=> 72V <=> 75V1 <=> 75V2 <=>
• • •
RST MASK 25 <=>
MASK OFF
<=> 50V <=> 60V <=> 60P
PTN MASK 01 <=>
<=> 72V <=> 75V1 <=> 75V2 <=>
• • •
PTN MASK 49 <=>
MASK OFF
CMB MASK 01 <=> <=> 50V <=> 60V <=> 60P
<=> 72V <=> 75V1 <=> 75V2 <=>
• • •
CMB MASK 17 <=>
DISABLE <=> ENABLE
CABLE <=> AIR
DISABLE <=> ENABLE
SIDE MASK LEVEL <=>
DATA RESET <=> NO <=> YES
MODE SHIFT <=> NO <=> YES
DISABLE <=> ENABLE
AUTO ADJUST. <=> NO <=> YES
(*1): Exit the Service Factory Menu and enter the Digital Tuner Service menu.
PDP-5020FD
2
3
Exclusively used for
production line
for the technical analysis
for the technical analysis
for the technical analysis
for the technical analysis (*1)
for the technical analysis
3
4
Remarks
4