Using And Replacing The; The Cooktop Light - Whirlpool RE960PXV Use & Care Manual

Using and Replacing the Light Bulbs
The Cooktop light
The fluorescent top light is under the control panel. The Top Light Switch is on
the control panel. Push it in and hold it for a few seconds to turn on the top
light. Push it again to turn it off.
To Replace:
Electrical Shock Hazard
Make sure power to the range has been turned OFF at the main power
supply before replacing the fluorescent tube. Failure to do so could result
In electrlcal shock.
1.
Unplug appliance or disconnect
at the main power supply.
Remove the 3 screws and metal
trim that supports the top of the
light cover. The glass is heavy.
Hold It securely.
2. Wlth both hands, pull top of light
cover towards you and lift it out of
bottom support trim.
3. Grasp the fluorescent tube at both
ends. Roll the tube away from you
until both ends come out of the
receptacles. Replace with a 20-
watt cool-white fluorescent tube.
26
4. With both hands, carefully fit the
glass light cover into the bottom
metal support trim. Then rotate
the top of the light cover until it
touches the contact stops.
Replace the top support trim
and 3 screws. Plug in appliance
or reconnect at the main power
SUPPlY.