Using And Replacing The Light Bulbs - Whirlpool RF398PXP Use & Care Manual

Using and Replacing the Light Bulbs
The Cooktop light
The fluorescent top light is under the control panel. The Top Light switch is on the
control panel. Push it in and hold it for a second or two to turn on the top light.
Push it again to turn it off
1.
Turn off the electric power at the
main power supply.
Flip up the top of the control
panel.
The
Oven
Light
2. Grasp the fluorescent tube at both
ends. Turn the tube away from you
until both ends come out of the
receptacles. Replace with a 20-
watt cool-white fluorescent tube.
Close the top panel.
Turn electric power back on at
the main power supply.
The oven light will come on when you open the oven door. To turn the light on
when the oven door is closed, push the Oven Light switch on the control panel.
Push it again to turn off the light.
1.
Turn off the electric power at the
main power supply.
Remove the bulb cover in the back
of the oven by pulling out and push-
ing the wire holder to the side.
2. Remove the light bulb from its
socket. Replace the bulb with a
40-watt appliance bulb.
Replace the bulb cover and snap
the wire holder in place.
Turn the power back on at the
main power supply.
CAUTION: The
bulb cover must be in
place when using the oven. The cover
protects the bulb from breaking.
24