CHECKING THE CRUISE CONTROL
SYSTEM
Malfunction detected during operation
Set speed can not be cancelled by cancel
switches ("CANCEL", front brake, rear brake
and/or clutch switches).
1. "CANCEL" switch
• Check the "CANCEL" switch for continuity.
Refer to "CHECKING THE SWITCHES".
• Is the "CANCEL" switch OK?
YES
2. Front brake, rear brake and clutch switch.
• Check the switches for continuity.
Refer to "CHECKING THE SWITCHES".
• Are the switches OK?
YES
CRUISE CONTROL SYSTEM
NO
Replace
the
right
handlebar switch.
NO
Replace the faulty
switch(es).
– 70 –
3. Cruise control unit
• Connect the pocket tester (DC 20 V) to the
cruise control unit coupler as shown.
Positive tester probe →
red 1 or green/white 2
Negative tester probe → black 3
L/B
L/W
G/L
L/R
1
• Set the main switch to "ON" and the
"CRUISE" switch to "ON".
• When operating the cancel switches
("CANCEL", front brake, rear brake or
clutch switches), the voltage reading is
12 V to 0 V.
• Is the voltage within specification?
YES
–
+
ELEC
2
G/W
P/B
P/W
O
R
B
Y/B
W
3
NO
The wiring circuit is
faulty and must be
repaired.