Instrument And Control Functions; Activating And Setting The Cruise Control System - Yamaha Royal Star Tour Deluxe XVZ13CTTC Supplementary Service Manual

CRUISE CONTROL SYSTEM
1 2

INSTRUMENT AND CONTROL FUNCTIONS

Activating and setting the cruise control
system
The cruise control system can only be acti-
vated when riding in 4th or 5th gear at speeds
between 50 km/h (30 mi/h) and 130 km/h (80
mi/h).
1 "CRUISE" switch
2 Cruise control switch
3 "CANCEL" switch
To activate and set the cruise control system:
1. Push the "CRUISE" switch to the "ACT"
(activate) position and then release the
switch. The cruise control "ON" indicator
light will come on.
1 Cruise control "SET" indicator light
2 Cruise control "ON" indicator light
2. Press the "SET/DEC" (set/decelerate) side
of the cruise control switch to activate the
cruise control system. The cruise control
"SET" indicator light comes on.
3. Set the desired traveling speed as follows.
Press the "RES/ACC" (resume/accelerate)
side of the cruise control switch to increase
the set speed or the "SET/DEC" side to
decrease the speed.
NOTE:
Pressing the cruise control switch once will
change the speed in increments of 1.6 km/h
(1 mi/h). Holding the cruise control switch
down will increase or decrease the speed con-
tinuously until the switch is released.
The traveling speed can be set to a maximum
of 130 km/h (80 mi/h) and a minimum of 50
km/h (30 mi/h).
When the cruise control system is activated
and the throttle grip is turned to increase the
speed by up to 8 km/h (5 mi/h), the cruise con-
trol system will return to the set speed after the
throttle grip is released. However, if the speed
is increased by more than 8 km/h (5 mi/h), the
cruise control system will be deactivated until
the traveling speed is within 8 km/h (5 mi/h) of
the set speed.
– 68 –
– +
ELEC