Table of Contents
Advertisement
User's Guide
❏ When the problem cannot be cleared after cleaning the paper path, the part inside the printer that is shown in
the illustration is smeared. Turn off the printer, and then wipe off the ink using a cotton swab.
Do not touch the white flat cable, translucent film, and ink tubes inside the printer. Doing so may cause a
malfunction.
❏ Place the paper on a flat surface to check if it is curled. If it is, flatten it.
❏ When performing manual 2-sided printing, make sure that the ink is completely dry before reloading the paper.
Related Information
"Loading Paper in the Rear Paper Feed" on page 39
&
"Cleaning the Paper Path for Ink Smears" on page 110
&
Paper is Smeared During Automatic 2-Sided Printing
When using the automatic 2-sided printing feature and printing high density data such as images and graphs, set
the print density to lower and the drying time to longer.
Related Information
"Menu Options for Printer Setup" on page 47
&
Solving Problems
143
Advertisement
Table of Contents
