Broadcasting To Target Devices - Avocent DSR1021 Installer/User Manual

b. Left-click on the title bar and drag to the desired location.
c. Right-click to return to the Flag dialog box.
NOTE: Changes made to the flag position are not saved until you click OK in the Flag dialog box.
6. Click OK to save settings.
-or-
Click X to exit without saving changes.

Broadcasting to target devices

The local user can simultaneously control multiple target devices in a system to ensure that all
selected target devices receive identical input. You can choose to broadcast keystrokes and mouse
movements independently.
NOTE: You can broadcast to as many as eight target devices at a time, one target device per port.
To access the OSCAR interface Broadcast dialog box:
1. If the OSCAR interface is not open, press
Figure 3.1 on page 21 for an illustration of the Main dialog box populated with sample data.
2. Click Setup - Broadcast to open the Broadcast dialog box. Figure 3.10 shows the Broadcast
dialog box populated with sample data.
Figure 3.10: Broadcast Dialog Box
Chapter 3: Local Port Operation
to open the Main dialog box. See
Print Screen
33