Led Light Bulbs; To Prevent Damage Or Fire - Toyota IQ 2012 Owner's Manual

4-3. Do-it-yourself maintenance

LED light bulbs


The high mounted stoplight consist of a number of LEDs. If any of the LEDs
burn out, take your vehicle to any authorized Toyota dealer or repairer, or
another duly qualified and equipped professional to have the light replaced.
CAUTION
 Replacing light bulbs
 Turn off the lights. Do not attempt to replace the bulb immediately after
turning off the lights.
The bulbs become very hot and may cause burns.
 Do not touch the glass portion of the light bulb with bare hands. When it is
unavoidable to hold the glass portion, use and hold with a clean dry cloth
to avoid getting moisture and oils on the bulb.
Also, if the bulb is scratched or dropped, it may blow out or crack.
 Fully install light bulbs and any parts used to secure them. Failure to do so
may result in heat damage, fire, or water entering the headlight unit. This
may damage the headlights or cause condensation to build up on the lens.


To prevent damage or fire

Make sure bulbs are fully seated and locked.
384
iQ_WE_74014E