Closing The Windows - Toyota IQ 2012 Owner's Manual

1-4. Opening and closing the windows
If the window still cannot be closed even by carrying out the operation

explained above, initialize the function by performing the following proce-
dure.
Hold the power window switch in the one-touch closing position.
Continue holding the switch for a further 6 seconds after the win-
dow has closed.
Hold the power window switch in the one-touch opening position.
Continue holding the switch for a further 2 seconds after the win-
dow has opened completely.
Hold the power window switch in the one-touch closing position
once again. Continue holding the switch for a further 2 seconds
after the window has closed.
If you release the switch while the window is moving, start again from the
beginning. If the window continues to close but then re-open slightly even
after performing the above procedure correctly, have the vehicle inspected
by any authorized Toyota dealer or repairer, or another duly qualified and
equipped professional.
CAUTION


Closing the windows

Observe the following precautions.
Failing to do so may result in death or serious injury.
 Check to make sure that all passengers do not have any part of their body
in a position where it could be caught when a window is being operated.
 Do not allow children to operate the power windows.
Closing a power window on someone can cause serious injury, and in
some instances, even death.
 Jam protection function
 Never try jamming any part of your body to activate the jam protection
function intentionally.
 The jam protection function may not work if something gets caught just
before the window fully closes.
102
iQ_WE_74014E