Advertisement
EN
HALOGEN HEATER
OPERATING INSTRUCTIONS
Read the instructions carefully before installing and operating the appliance or performing
maintenance operations. Observe all the safety instructions; failure to observe the instructions may
cause accidents and/or damages. Store these instructions for future reference.
V 06/16
7
Advertisement
Table of Contents
Related Manuals for Argo drum
Summary of Contents for Argo drum
- Page 1 HALOGEN HEATER OPERATING INSTRUCTIONS Read the instructions carefully before installing and operating the appliance or performing maintenance operations. Observe all the safety instructions; failure to observe the instructions may cause accidents and/or damages. Store these instructions for future reference. V 06/16...
- Page 2 GENERAL SAFETY INFORMATION Use this halogen heater only as outlined in this manual. Any other use not recommended by the manufacturer may cause fire, electric shock or injury to people. Ensure that the mains power complies with the voltage specified on the halogen heater data plate (220-240V~50Hz).
- Page 3 Do not place anything on the appliance, use the appliance to dry clothing. Use the appliance in a well-ventilated area. Avoid placing fingers or foreign objects in the air inlet/outlet grilles, as this may lead to electric shock or fire and may damage the appliance. ...
- Page 4 Do not connect the appliance to the mains power before it has been properly assembled and positioned. Do not run the cord under carpets. Do not cover the cord with blankets, carpets or similar materials. Place the cord far away from busy areas or where it cannot be accidentally pulled-out.
- Page 5 DESCRIPTION OF PARTS 1. On/off selection knob 6. Anti tip device 2. Swing button 7. Fixing screws 3. Halogen lamps 8. Fairlead 4. Handle 5. Base HOW TO USE THE HALOGEN HEATER Connect the power cord to a suitable electric socket (220-240V~/50Hz). Place the On/off and selection knob in the desired position: ECO (500 W) or COMFORT (1000 W).
- Page 6 OVERHEATING SAFETY DEVICE In case of overheating the safety cut out protecting the heating element will automatically switch off the appliance. In this case the appliance stops working. If this happens: switch off the heater; remove the causes of abnormal operation or overheating (i.e. obstacles in front of air inlet or air outlet grille, abnormal accumulations of dusts inside the appliance);...
Need help?
Do you have a question about the drum and is the answer not in the manual?
Questions and answers