Omron CS1W-EIP21 Operation Manual page 73

Network Configurator Installation
Upgrading the
Software Version
(NE1S Series Only)
Installing an Update
1,2,3...
Installing a Release
1,2,3...
3-1-3 Installing the USB Driver (NE1S Series Only)
Note
1,2,3...
50
2. Select Network Configurator for EtherNet/IP in the Add/Remove Pro-
grams Dialog Box, as shown below, and click the Change/Remove Button.
The following dialog box will be displayed.
3. Click the Yes Button.
The software will be uninstalled. When uninstallation is completed normal-
ly, the Maintenance Complete Dialog Box will be displayed.
4. Click the Finish Button.
Use the following procedure to upgrade the version of the Network Configura-
tor.
Install the updated version without uninstalling the existing software.
1. The updated version is provided as an executable (.exe) file, so either of
the following methods can be used to execute the update file.
• Double-click the file in the My Computer Window.
• Select Run from the Start Menu, browse and select the update file,
and click the OK Button.
1. Uninstall the software to be upgraded (refer to Uninstallation Procedure).
2. Install the new software version (refer to 3-1-2 Installing the Network Con-
figurator).
Administrator privileges are required to install the software.
Use the following procedure to install the USB driver.
1. Connect the CPU Unit and the computer with a USB cable.
2. Turn ON the power supply to the CPU Unit.
After a few moments, the following dialog box will be displayed.
Section 3-1