Omron CS1W-EIP21 Operation Manual page 56

Checking Bandwidth Usage and Adjusting the Packet Interval (RPI)
Method 1: Same Packet Interval Set for all Connections
The Usage of Capacity can be adjusted by changing the packet interval
(RPI) for all of the connections together.
a. Click the Set Packet Interval (RPI) Button at the bottom of the Usage
of Device Bandwidth Dialog Box.
b. The Set Packet Interval (RPI) Dialog Box will be displayed. Input a new
packet interval (RPI) value, and click the OK Button.
Method 2: Changing a Particular Device's Packet Interval (RPI) Set-
ting
The Usage of Capacity can be adjusted for only a particular device by
changing the packet intervals (RPI) for all of the device's connections to-
gether.
In this case, the Usage of Capacity will also change for the devices that are
the target devices of the connection which was adjusted.
Section 2-3
33