Panasonic AW-HS50E Operating Instructions Manual page 14

1. Parts and their functions
 KEY ON button [KEY ON]
This is used to combine key materials for the
transition duration which has been set.
Press the button.
Image combining is
The button
now underway.
indicator goes off.
Images can no
longer be combined.
Image combining is
now disabled.
By turning the OSD/TIME dial () while keeping
the KEY ON button pressed after the button has
been held down, the transition duration can be
changed.
 FTB ON button [FTB ON]
Press this button to fade out the programme image
to a black screen for the transition duration which
has been set.
When the button is pressed again, the programme
image is faded in from the black screen.
Press the button.
Now fading out.
The button
indicator goes off.
Programme image
Now fading in.
An image other than the black screen can be set as
the screen to which the programme image is to be
faded out.
 Refer to "1-5. FTB (fade to black)" (<Operations
and Settings> Operating Instructions).
By turning the OSD/TIME dial () while keeping
the FTB ON button pressed after the button has
been held down, the transition duration can be
changed.
 CUT button [BKGD CUT]
This instantly initiates a transition for the currently
selected operation.
Button indicator ON:
The transition is being executed.
Button indicator OFF:
The transition is complete.
Blinks
Lights
Image combining
is now completed.
Lights
Press the button.
Blinks
Lights
Fade-out is now
completed.
Lights
Press the button.
 AUTO button [BKGD AUTO]
This automatically initiates the transition for the
transition duration which has been set.
(Auto transition)
Button indicator ON:
Auto transition is being executed.
Button indicator OFF:
Auto transition is complete.
If the AUTO button is pressed while auto transition
is being executed, the auto transition operation is
aborted.
When the button is pressed again after the
operation was aborted, the remaining transition is
executed.
When the AUTO button is pressed with the slide
lever () at a midway setting, the transition is
executed in the remaining time from the midway
status.
By turning the OSD/TIME dial () while keeping
the AUTO button pressed after the button has been
held down, the transition duration can be changed.
 Slide lever
This is used when executing transitions manually.
When the slide lever is moved to the end, the
transition is completed.
If it has been moved while an auto transition was
being executed, operation will switch to manual as
soon as the position of the slide lever has gone
beyond the amount of the transition having been
executed.
It is possible to select a background, key or PinP
using a menu for materials involving transitions.
13 (E)