Fluke 700G01 User Manual page 7

•
Batteries must only be changed in an area known to be non-hazardous. Explosion
hazard.
•
Remove the batteries if the Product is not used for an extended period of time, or if
stored in temperatures above 50 °C. If the batteries are not removed, battery leakage can
damage the Product.
•
Have an approved technician repair the Product.
To avoid possible damage to Product or to equipment under test:
•
If the display reads "OL" the range limit is exceeded and the pressure source must
immediately be reduced.
•
Always apply thread seal tape to the threads of the gauge.
•
Do not exceed the maximum torque allowed. Maximum torque allowed is
13.5 Nm = 10 lbft.
Table 1 lists the symbols that can be used on the Product or in this manual.
Symbol
W
WARNING - RISK OF DANGER. Consult user documentation.
Battery status


Battery
P
Conforms to European Union directives.
)
Certified by CSA Group to North American safety standards.

Conforms to relevant Australian Safety and EMC standards.

Conforms to relevant South Korean EMC Standards.
(
Conforms to the European Explosive Atmospheres (ATEX) directive.
This product complies with the WEEE Directive marking requirements. The affixed
label indicates that you must not discard this electrical/electronic product in
domestic household waste. Product Category: With reference to the equipment
~
types in the WEEE Directive Annex I, this product is classed as category 9
"Monitoring and Control Instrumentation" product. Do not dispose of this product as
unsorted municipal waste.
W Caution
Table 1. Symbols
Description
Pressure Gauges
3