Playing Back Your Recording; Using The Built-In Tv Tuner; Changing Tv Channels; Changing Audio Channels - Pioneer DVR-520H Operating Instructions Manual

04 Getting started
5 Use the CHANNEL +/– buttons to select the TV
channel you want to record from.
• You can also use the +/– buttons on the front panel if
the recorder is stopped.
• Antenna channels are numbered 2 through 69. Cable
channels are numbered 1 through 125.
Press ì REC to start recording.
6
• By default, the recording will be in SP (standard play)
mode, which will give you around two hours of
recording from a blank DVD disc.
• You can pause recording by pressing
Press ì REC or
7 When you want to stop recording, press
STOP REC.

Playing back your recording

The TV program you just recorded should be on the HDD
or DVD disc as a single title with one or more chapters.
• Press PLAY to start playback.
If you want to stop playback before the end of the
recording, press

Using the built-in TV tuner

Changing TV channels

There are three different ways to select TV channels. Note
that you can't change the TV channel during playback,
recording or during recording standby.
• CHANNEL +/– buttons on the remote
• Number buttons on the remote – For example, to
select channel 4, press 4 then ENTER; for channel 34,
press 3, 4, ENTER; for channel 102, press 1, 0, 2,
ENTER.
• +/– buttons on the front panel
28
En
PAUSE.
PAUSE again to restart recording.
STOP.
CHANNEL
ENTER
Note
• Antenna channels are numbered 2 through 69. Cable
channels are numbered 1 through 125.
• You can't change TV channels during playback or
recording, or while in recording standby.

Changing audio channels

Some TV programs are broadcast with both a main and a
Second Audio Program (SAP). You can change the TV
audio using the AUDIO button.
AUDIO
• Press AUDIO to change the TV audio.
The current audio channel is displayed on-screen.
Mono
Stereo
• If SAP is selected, but there is no SAP channel being
broadcast, you will still hear the main audio channel.
• If the sound is poor quality when set to Stereo, you
can often improve it by changing to Mono.
SAP