Verifying The Virtual Interface - Cisco Nexus 7000 series Configuration Manual

Nx-os fcoe
Hide thumbs Also See for Nexus 7000 series:
Table of Contents

Advertisement

Verifying the Virtual Interface

Verifying the Virtual Interface

To display configuration information about virtual interfaces, perform one of the following tasks:
Command
show interface vfc vfc-id
show interface brief
show vlan fcoe
This example shows how to display a virtual Fibre Channel interface bound to an Ethernet interface:
switch# show interface vfc 3
vfc3 is up
This example shows how to display the status of all the interfaces on the switch (some output has been removed
for brevity):
switch# show interface brief
-------------------------------------------------------------------------------
Interface
-------------------------------------------------------------------------------
fc3/1
fc3/2
...
fc3/8
-------------------------------------------------------------------------------
Interface
-------------------------------------------------------------------------------
Ethernet1/1
Ethernet1/2
Ethernet1/3
...
Ethernet1/39
Ethernet1/40
-------------------------------------------------------------------------------
Interface
-------------------------------------------------------------------------------
mgmt0
-------------------------------------------------------------------------------
Cisco NX-OS FCoE Configuration Guide for Nexus 7000 and MDS 9500
32
Bound interface is Ethernet1/37
Hardware is Virtual Fibre Channel
Port WWN is 20:02:00:0d:ec:6d:95:3f
Admin port mode is F, trunk mode is on
snmp link state traps are enabled
Port mode is F, FCID is 0x490100
Port vsan is 931
1 minute input rate 0 bits/sec, 0 bytes/sec, 0 frames/sec
1 minute output rate 0 bits/sec, 0 bytes/sec, 0 frames/sec
0 frames input, 0 bytes
0 discards, 0 errors
0 frames output, 0 bytes
0 discards, 0 errors
Interface last changed at Thu May 21 04:44:42 2009
Vsan
Admin
Admin
Mode
Trunk
Mode
1
auto
on
1
auto
on
1
auto
on
Status
hwFailure
hwFailure
up
sfpIsAbsen --
sfpIsAbsen --
Status
up
Configuring FCoE VLANs and Virtual Interfaces
Purpose
Displays the detailed configuration of the specified
Fibre Channel interface.
Displays the status of all interfaces.
Displays the mapping of FCoE VLANs to VSANs.
Status
SFP
Oper
Mode
trunking
swl
sfpAbsent
--
sfpAbsent
--
IP Address
Speed
--
--
--
--
--
10000
--
--
IP Address
Speed
172.16.24.41
100
Oper
Port
Speed
Channel
(Gbps)
TE
2
--
--
--
--
--
MTU
Port
Channel
1500
--
1500
--
1500
--
1500
--
1500
--
MTU
1500
OL-25809-02

Advertisement

Table of Contents
loading

This manual is also suitable for:

Mds 9500 series

Table of Contents