Allocating Shared Interfaces - Cisco Nexus 7000 series Configuration Manual

Nx-os fcoe
Hide thumbs Also See for Nexus 7000 series:
Table of Contents

Advertisement

Allocating Shared Interfaces

Related Topics
Cisco Nexus 7000: Guidelines and Limitations, on page 8
Allocating Shared Interfaces
You can share interfaces between a storage VDC and another VDC.
Before You Begin
• Ensure you have installed the correct license for FCoE.
• Ensure you are in the correct VDC.
• Ensure any shared interfaces are from an F-series module.
• Ensure you have allocated the FCoE VLAN range.
• Interfaces can only be shared between the storage VDC and one other VDC.
SUMMARY STEPS
1. configure terminal
2. interface if-range
3. switchport mode trunk
4. spanning-tree port type edge trunk
5. no shutdown
6. vdc vdc-name type storage
7. allocate shared interface if-range
8. (Optional) show vdc shared membership
9. (Optional) switchto vdc vdc-name
10. configure terminal
11. feature lldp
12. interface if-range
13. no shutdown
14. (Optional) show interface if-range
15. (Optional) copy running-config startup-config
Cisco NX-OS FCoE Configuration Guide for Nexus 7000 and MDS 9500
44
Storage VDC on Cisco Nexus 7000 Series Switches
OL-25809-02

Advertisement

Table of Contents
loading

This manual is also suitable for:

Mds 9500 series

Table of Contents