Allocating The Fcoe Vlan Range - Cisco Nexus 7000 series Configuration Manual

Storage VDC on Cisco Nexus 7000 Series Switches

Allocating the FCoE VLAN Range

Before You Begin
• Ensure you have installed the correct license for FCoE.
• Ensure you are in the correct VDC.
SUMMARY STEPS
1. configure terminal
2. vdc vdc-name type storage
3. allocate fcoe-vlan-range vlan-range [from vdcs vdc-name]
4. (Optional) show fcoe-vlan-range
5. (Optional) copy running-config startup-config
DETAILED STEPS
Command or Action
Step 1 configure terminal
Example:
switch# configure terminal
switch(config)#
Step 2 vdc vdc-name type storage
Example:
switch(config)# vdc fcoe-vdc type storage
switch(config-vdc)#
Step 3
allocate fcoe-vlan-range vlan-range [from vdcs
vdc-name]
Example:
switch(config-vdc)# allocate fcoe-vlan-range
10-30
Step 4
show fcoe-vlan-range
Example:
switch(config-vdc)#
Step 5 copy running-config startup-config
Example:
switch(config-vdc)# copy running-config
startup-config
OL-25809-02
show fcoe-vlan-range
Cisco NX-OS FCoE Configuration Guide for Nexus 7000 and MDS 9500
Allocating the FCoE VLAN Range
Purpose
Enters configuration mode.
Enters VDC configuration mode. You can only enable storage
feature in a storage VDC. You do not need to allow the
feature-set or enable it in the storage VDC because this process
is handled automatically for a storage VDC.
Allocates the VLANs that can be used for FCoE and mapped
to a VSAN. You can optionally allocate the VLANs from
another VDC.
(Optional)
Displays information about the VLAN range allocated for
FCoE.
(Optional)
Copies the running configuration to the startup configuration.
43