Control Panel; Menu Structure - McCulloch ROB R600 Operator's Manual

wire. Place the robotic lawnmower about 2 m from
the guide wire, facing the guide wire.
3. Select HOME mode by pressing the house symbol
OK when the cursor is at Home.
key and pressing
Press START and close the hatch.
4. Check that the robotic lawnmower follows the guide
wire all the way to the charging station and that it
docks with the charging station. The test is approved
only if the robotic lawnmower is able to follow the
guide wire the entire distance to the charging station
and docks at the first attempt. If the robotic
lawnmower is unable to dock on the first attempt, it
will automatically try again. The installation is not
approved if the robotic lawnmower needs two or
more attempts to dock with the charging station. In
this case, check that the charging station, the
boundary wire and the guide wire are installed in
accordance with the instructions.
5. The robotic lawnmower will stay in the charging
station until AUTO or MAN mode is selected. See
Operation selection on page 33 .
The guide system must first be calibrated if the
above test is to provide a satisfactory result. See
First start-up and calibration on page 20 .

3.11 Control panel

3.11.1 Instruction - Control panel
All commands and settings for the robotic lawnmower
are made via the control panel. All functions are
accessed via a number of menus.
The control panel consists of a display and a keypad. All
information is shown on the display and all input is done
using the buttons.
3.11.2 Keypad
The keypad consists of 4 groups of buttons:
• The START button is used to activate the robotic
lawnmower. This is normally the last button to be
pressed before closing the hatch.
• The 3 multi-choice buttons offer various functions,
depending on where in the menu structure you are.
The button function is shown at the bottom of the
display.
• The number keys are used for instance to enter the
PIN code or time settings.
• The operation selection button is symbolised by a
house. When the button has been pressed, the
selected operation mode is shown in the display.
3.11.3 Display
When the STOP button has been pressed and the hatch
is opened, the operation window appears showing the
time, selected operating mode, number of mowing
hours, battery status and timer setting.
358 - 002 -
• The clock shows the current time.
• Date shows the current day.
• The number of operating hours indicates the number
of hours since the day of manufacture that the
robotic lawnmower has been in operation. The time
that the robotic lawnmower has spent mowing or
searching for the charging station is counted as
operating time.
AUTO , MAN or HOME show which mode of
•
operation is selected. See
page 33 .
• The battery status shows the remaining battery
charge.
• The ECO symbol is displayed if the robotic
ECO mode .
lawnmower is set in
• The clock symbol indicates when the timer settings
are set. The clock symbol is black when the robotic
lawnmower is not allowed to mow due to a timer
setting.
MENU text illustrates that the main menu can
• The
be reached by pressing the multi-choice button that
is located under the text.
3.11.4 Submenus
There are a number of submenus under each option.
You can access all the functions to set the robotic
lawnmower settings via the submenus.
Certain submenus contain options that are ticked off to
the left. This means that these options are selected.
Check or uncheck the box by pressing

3.12 Menu structure

The main menu for the ROB R600 offers 3 options:
• Timer
• Security
• Settings
The main menu for the ROB R800, ROB R1000 offers 4
options:
• Timer
• Installation
• Security
• Settings
Operation selection on
OK .
Installation - 21