Table of Contents
Advertisement
CARE
&CLEANING,
¢OHT.
MAINTENANCE OVEN
LIGHT
OVEN
WINDOW
TO PROTECT THE OVEN
OVENDOOR
DOOR W INDOW:
Disconnect power to range
1. Do not use abrasive cleaning
beforereplacinglightbulb.
agentssuchas steelwoolscouring
Usea dry potholderto prevent
pads or powdered cleansers as
Do not placeexcessiveweighton
possible harm to handswhen
they may scratchthe glass.
or stand on an open oven door.
replacingbulb.
This could causethe rangeto tip
2. Do not hit the glasswith pots,pans,
over,breakthe door,or injurethe
> Be sure bulb is cool before
furniture,toysor other objects.
user.
touchingbulb.
3. Do notclosethe dooruntiltheoven
_- Do not attemptto open or close
> Do not touch hot bulb with a
racksare inplace.
dooror operateoven untildooris
dampcloth as this may cause
properlyreplaced,
the bulbto break.
Scratching,hitting,jarring or stressing
the glass may weaken its structure
> Never place fingers between
causingan increasedrisk of breakage
hinge and front oven frame,
at a laterdate.
Hingearms are spring mounted.
_uL_COVE_
If accidentallyhit, the hinge will
__-_
_-_
1
slam shut against oven frame
LEVELING
LEGS
and could injureyour fingers.
TO REMOVE:
RETAINER
> Besure the anti-tipbracketse-
1. Whencool, openthe oven door to
TO REPLACEOVENLIGHTBULB:
cures one of the rear leveling
thefirststop position(openedabout
legsto the floor to preventthe
fourinches).
1. Whenoven is cool, hold bulb cover
rangefrom accidentally tipping.
in place,thenslide wire retaineroff
2. Grasp door at each side. Do not
cover.NOTE: Bulb cover will fall
The rangeshould be leveledwhen in-
usethe doorhandleto lift door.
if not held in place while remov-
stalled. If the range is not level, turn
3. Lift upevenlyuntildoorclearshinge
ing wire retainer,
the plastic leveling legs, located at
each corner of the range,
arms.
2. Removebulb coverand lightbulb.
until rangeis level.
_'1_
TO REPLACE:
3. Replace with a 40-watt appliance
, ras 0oo
at each side.
4. Replacebulbcoverandsecurewith
wire retainer.
_
r
_ANTI_TIPBRACKET
2. Align slots in
the doorwiththe hingearmson the
5. Reconnectpower to range. Reset
LEVELING
LEG
range,
clock.
3. Slidethe door downonto the hinge
arms until the door is completely
seatedon the hinges.Push down
on the top corners of the door to
completely seat door on hinges.
Doorshouldnot appearcrooked.
NOTE:The ovendooron a new range
may feel "spongy"when it is closed.
This is normal and will decreasewith
use.
15
Advertisement
Table of Contents
