Initial Operation; Putting Into Storage - Gardena FFP 5000 UVC Operating Instructions Manual

4. Initial Operation

A
Putting into operation
as a fountain pump :
9
B Putting into operation
as a stream pump :
9

5. Putting into Storage

Overwintering /
Storage :
14
Note : In the event of an uneven foundation, the fountain can be
vertically aligned with the adjustable ball joint
1. When using a gargoyle, connect the hose of the gargoyle
to the stepped nipple
2. Place the UVC Underwater Filter with the fountain on a firm
base so that the filter housing
water.
3. Undo the fixing nut
3
place nozzle tube
D
fixing nut tight again.
4. Connect the mains plug of the UVC Under-
water Filter to an A.C. socket.
Attention : pump starts immediately.
5. Unscrew Water Bell, Fleur-de-Lis or
Water Jets out of the nozzle tube
the fountain has the required shape.
6. Adjust the size of the fountain with the
5
regulating valves
7. Adjust the required amount of water of
the gargoyle with the regulating valves
Note : When using a ¾ " hose, the front part of the stepped
nipple can be cut off with a saw.
1. Connect the hose of the stream to the stepped nipple
2. Place the UVC Underwater Filter
with the stepped nipple on a firm
base so that the filter housing
is completely covered by water
(max. 2 m under water).
3. Connect the mains plug of the
UVC Underwater Filter to an
A.C. socket. Attention : filter pump
starts immediately.
4. Adjust the required amount of water
with the regulating valves
The storage location must not be accessible to children.
1. Remove the UVC Underwater Filter from the pond before frost is
expected, clean and store in a frost-free place.
2. To avoid difficulties when starting up in the spring, we recom-
mend storing the pump in a frost-free location in a container
filled with water.
The mains plug must not be submerged.
6
.
9
is completely covered by
D 2
of the ball joint ,
vertically and screw
3
until
.
0
.
9
0
.
2
.
3
5
2
D
6
0
6
.
0 6