Assembly - Gardena FFP 5000 UVC Operating Instructions Manual

3. Assembly

Assembling the UVC bulb :
A Installing the set as a
fountain pump :
4
a
b
7
B
Installing the set as a
stream pump :
7
Connecting the pond aerator
(available as an option) :
9
9
A
v To assemble the UVC lamp see 7. Troubleshooting
"Replacing the UVC bulb" .
The stepped nipple (½ " / ¾ " )
for example, to a gargoyle.
If the side outlet is not needed the
screwed in instead of the step nipple.
1. Screw the T-joint
3
2. Screw the stepped nipple
7
T-piece .
3. Screw the ball joint
4. Push the nozzle tube
the sleeve
2
5. Snap the nozzle tube
6. Screw required fountain insert
6
nozzle tube
1
a) Cascade
The stepped nipple (½ " / ¾ " )
example, to a stream or source stone.
8
1. Screw the T-joint
6
2. Screw the stepped nipple
7
T-piece .
1
3. Screw the cap
The GARDENA Pond Aerator Art. 7942 / 7943 can be con-
nected to increase the oxygen content. The aragonite and
the hose are supplied with the pond aerator.
1. Remove the filter housing (see 6. Maintenance).
0
2. Connect the aragonite
nection piece
3. Put the aragonite
that the hose is not kinked.
A
4. Connect the pond aerator hose
0
from the outside.
6
can be used for connection,
6
7
onto the connection
6
onto the side outlet of the
2
onto the T-piece
3
onto the telescopic handle
a
.
3
into the ball joint
4
3
.
b) Water Bell c) Fleur-de-Lis
6
can be used for connection, for
7
onto the connection
6
onto the side outlet of the
8
onto the T-piece
9
with a piece of hose to the air con-
0
.
9
between the filter stone bags ensuring
A
8
sealing cap can be
1
.
7
.
b
up to
2
.
a) / b) / c) / d) fully into the
d) Water Jets
1
.
7
.
to the air connection piece
13