Honeywell Sensepoint Technical Manual page 16

Toxic/Oxygen
Detector
+ Supply (red)
Flammable
Detector
Non-
Sensitive
Element
(blue)
3 Close the lid of the enclosure and secure it.
Cautions Ensure there is no moisture inside the enclosure before closing
the lid.
Ensure the seal, between the body and the cover, is correctly
located and is secure.
Ensure the cover is securely clamped to the body of the enclosure.
Use only the captive fixing screws supplied, replacement with
alternative screws will invalidate certification.
Fully tighten the four M4 captive securing hex screws.
4 Carry out one of the following two procedures.
2106M0525 Iss 2 Nov 05
Screen
(braided wire)
Signal (blue)
Sensitive
Element
(brown)
Earth
Terminal
Center Tap
(white)
Installation
16