Changing The Outer Filter - Honeywell Sensepoint Technical Manual

Changing the Outer Filter

This procedure applies to all types of Sensepoint gas detector. Refer to the following diagram.
1 Remove the sensor cap (or accessory).
Unscrew the cap/accessory in a counter-clockwise direction.
2 Remove the outer filter.
Discard the old filter.
3 Fit the new outer filter.
4 Refit the sensor cap (or accessory).
Screw the cap/accessory firmly in a clockwise direction.
2
1
2106M0525 Iss 2 Nov 05
Outer Filter
Sensor Cap
Counter-
clockwise
Sensor Body
New Outer Filter
3
4
Clockwise
Maintenance
26