Command Valve Solenoid - Remove (J.80.C.12.05 - F.10.A.10); 435, 445, 445Ct - Case 445CT Repair Manual

Command valve Solenoid - Remove (J.80.C.12.05 - F.10.A.10)

435, 445, 445CT

1. Loosen and remove the mounting bolts (4) from
the upper step plate (6 ). Remove the step plate
(6) from the loader frame.
1. Double check valve
2. Wire harness
2. Connect a vacuum pump to the hydraulic
reservoir.CAS1871
3. Reservoir - Apply vacuum (A.10.A.22 - F.35.A.50)
Start the vacuum pump.
4. Disconnect the electrical harness (2) from the
solenoid valve (1)electrical connection.
5. Tag and disconnect all of the hydraulic hose
connections (3) on the Solenoid Valve (1). Place
caps on the fittings and plugs in the hoses.
6. Stop the vacuum pump.
7. Loosen and remove the mounting bolts (5) from the
Solenoid Valve (1).
8. Remove the Solenoid Valve (1) from the step plate.
TOOLS AND COUPLERS - COUPLING Hydraulic coupling
Hydraulic Coupler Solenoid Valve Installation
3. Hose connections
4. Step mounting bolts
1
bs04d015_1
1 04/05/2005
J.80.C / 3
5. Valve mounting bolts
6. Upper step plate