Remote Control - JVC UX-N5 Instructions Manual

Remote Control

Battery installation
1
Open the battery cover.
2
Insert the included battery according to the
terminal indicated in the battery
compartment.
3
Close the cover.
②
Note
The included battery is for checking system
0
operations. Replace it with a new one as soon as
possible.
If the range or effectiveness of the remote control
0
decreases, replace the battery.
Periodically clean the transmitter on the remote
0
control and the sensor on the unit with a soft cloth.
Exposing the sensor on the unit to strong light may
0
interfere with operations. Change the direction of the
unit if this occurs.
Keep the remote control away from moisture, heat,
0
shock, and vibrations.
Read through the attached Safety Precaution to
0
ensure the safe usage of the batteries.
①
Operating range of the remote control
Point the remote control directly at the remote sensor
on the unit.
The remote control can be used within the range
shown below:
Remote sensor
0.2 m - 6 m
9