Table of Contents
Advertisement
Gi-L
To Select a Passage Within a Track
Press the up or down cursor key continuously while a CD is playing.
Pressing the up (>
A) cursor key advances the CD rapidly, pressing the down (Ww <#@) cursor key
plays the CD backwards rapidly. Release the cursor key at the point at which you wish to resume normal
playback.
<
a
Fo)
ra
LJ
Note: You cannot perform these fast forwards or fast backwards operation with the Remote Control.
Locating a Track With the Remote Control Directly
Using the number keys on the Remote Control allows you to go directly to the beginning of any track.
Press the DISC (1-3) button for the disc tray containing the track
you want to listen to.
«
Example: for the third disc, press the DESC 3 button.
Enter the number of the track you want to listen to with the num-
ber keys.
The selected track starts playing.
*
Example: for track 5, press 5. For track 15, press +10 then 5. For track 20. press +10, then 10. For
track 32, press +10 three times, then 2.
Programming the Playing Order of the
Tracks
You can change the order in which the discs and tracks play, and select only the discs and tracks you want
from among those loaded in the CD Player.
MB You can program up to 32 steps in any desired order from among the discs in the player.
MB You can only make or change a program when the CD Player is stopped.
Using the Unit
: Press the MENU button.
The TIMER section of the menu display blinks.
MENi
Press the cursor key to the right
or left {<< < or > » >!) and select
"CD P.MODE".
The menu display changes with each press of the
cursor keys as shown below.
+ Press the left («<4 <) cursor key
+> TIMER + CD P.MODE <> REPEAT +» AUTO EDIT — SEA CONTROL «>
Press the right (> »»} cursor key >
; Press the cursor key to the up or
down (A
or v <<
) and select
"PROGRAM".
The menu display changes with each press of the
cursor keys as shown below.
+ Press the up (»*» A) cursor key
++ CONTINUE ++ PROGRAM ++ RANDOM
Press the down (Vv <4) cursor key —
"PROGRAM?" appears on the display.
; Press the SET button.
The biinking "PROGRAM" display changes to
a steady display.
SET
Press the cursor key to the up or down
(>A
or v <<) to select the disc.
Track number
The display changes to the Program Entry display
Disc number
Step number
and the disc number and track number sections blink
for a few seconds.
The menu display changes with each press of the
cursor keys as shown below.
+ Press the up (»» A) cursor key
1+ 2++3
Press the down (v <4) cursor key >
*
If you press the DISC (1-3) buttons instead of pressing the up or down (> A or VW ~#d) cursor
key, you can select the disc.
*
While the display is blinking, perform the operations in steps 6 to 7. When the blinking display
changes to the "PROGRAM" display, repeat the operations in steps 5 to 7.
Press the cursor key to the right
or left (-«< < or > » |} to select
the track.
The track number appears on the display.
Press the SET button.
The blinking disc number and track number changes
to a steady light, and the step number is displayed.
Repeat steps 5 to 7 to select the other tracks for the program.
¢
To select another track from the same disc, repeat the procedure from step 6.
Press the » or CD button.
The Unit plays the tracks in the order you have programmed them.
Using the Remote Control
; Press the PLAY MODE button to
select PROGRAM.
"PROGRAM" lights up on the display.
The display changes with each press of the PLAY
MODE button as below.
— CONTINUE - PROGRAM — RANDOM
— (back to the beginning)
Select a disc with the DISC (1-3) buttons.
The display changes to the Program Entry display
and the disc number and track number sections
blink for a few seconds.
Track number
Disc number
Step number
*
While the display is blinking, perform the
operations in step 3. When the blinking display
changes to the "PROGRAM" display, repeat
the operations in steps 2 to 3.
. Press the number keys {1 to 10
and +10) to select the track to
program.
*
Example: For track 5, press 5. For track 15,
press +10 then 5. For track 20, press +10 then 10.
For track 32, press +10 three times, then 2.
The blinking disc number and track number changes to a steady light, and the step number is dis-
played.
Repeat steps 2 to 3 to select the other tracks for the program.
Press the » or CD button.
The Unit plays the tracks in the order you have programmed them.
25
HSSC1
Advertisement
Table of Contents
