JVC UX-N5 Instructions Manual page 22

Navigating iPod/iPhone/iPad from the main unit
Only iPod/iPhone can be connected to the dock. iPod/iPhone/iPad can be connected via USB connection.
Main unit
Operation
connection/USB
connection
Play/pause
Pause
Track up/down
Fast reverse/
forward
Repeat
Shuffle
Menu
Cursor Up/
Down
Enter
Note
Display content can be changed by pressing the [iPod DISPLAY/TV OUT] button.
0
Operations described here depend on the generation iPod/iPhone/iPad you are using.
0
Do not press any buttons on iPod/iPhone/iPad when operating iPod/iPhone/iPad from the remote control. The
0
volume level is adjusted by turning the volume knob (on the main unit) or by pressing the [VOLUME+/-] button
(on the remote control). Adjusting the volume on iPod/iPhone/iPad units give no effect.
System off (standby operation):
When the main unit is turned to standby mode, connected iPod/iPad unit will automatically turn to standby mode.
(it may take longer time.)
22
Remote control
Dock Dock connection USB connection
-
-
-
-
PRESET
PRESET
-
Press in the pause mode.
Press in the playback mode.
Press in the playback or pause mode.
If you press the button in the pause
mode, press the [I/W] button to start
the desired track.
Press and hold down in the playback
mode.
Release the button to resume
playback.
Press to toggle repeat mode.
(p. 25)
Press to toggle shuffle mode.
(p. 26)
Press to view the iPod/iPhone menu.
Operation cannot be performed on
iPad.
Press to select the iPod/iPhone
PRESET
menu.
Operation cannot be performed on
PRESET
iPad.
Press to confirm the iPod/iPhone
menu.
Operation cannot be performed on
iPad.
Note