Drip Tray And Waste Container - Miele CM 7500 Operating Instructions Manual

Drip tray and waste container

Danger of burning!
If the pipework has just been rinsed,
wait a while before removing the drip
tray as the water used for rinsing will
still run out of the coffee spouts.
Clean the drip tray and waste
container every day to avoid
unpleasant smells and mildew.
The waste container is located in the
drip tray. Water from rinsing also
collects in the waste container.
A prompt will appear in the display
when the drip tray and/or the waste
container is full and needs to be
emptied. Empty the drip tray and the
waste container.
 Pull the drip tray carefully out of the
machine. Take the lid  off.
 Empty the drip tray and the waste
container.
 Remove the drip tray cover  and
the lower panel .
Cleaning and care
Clean the lower panel by hand only
using hot water, a little washing up
liquid and a soft cloth.
All other parts are dishwasher-safe.
 Clean all parts thoroughly.
 Clean the metal contact discs and the
space between them carefully. Dry
everything thoroughly.
The discs will not be able to detect
that the drip tray is full if they are
damp or dirty.
Check this area once a week, if
necessary.
 Clean the inside of the machine
underneath the drip tray.
 Replace the waste container, the lid
and the lower panel on the drip tray,
before pushing it back into the coffee
machine.
Make sure that the drip tray is
pushed right into the coffee machine
as far as it will go.
63