850Mhz Frequency Selection - Verizon Smart-Cell User Manual

On / Off control of the service Block is possible. Each block's bandwidth are as follows.
(CDMA[UL] – 1.25MHz, LTE[UL] – 4.505MHz, CDMA[DL] – 1.25MHz, LTE[DL] – 4.505MHz)

2.3.5. 850MHz Frequency Selection

850MHz Cellular service provides by default, and supports up to two non-contiguous
blocks. Each block's bandwidth are as follows, and it is possible to choose any
combination of any band. (A1 - 11MHz, B1 - 10MHz, A2 - 1.5MHz, B2 - 2.5MHz.)
2.3.6. 1900MHz Frequency Selection
1900MHz AMP Unit is basically complied with PCS Band block, where maximum three
non-contiguous filtering configurations are available. Each sub block is adjustable per
1.25MHz bandwidth step up to 20MHz. Following table shows user selectable channel
numbers.
BAND
A1
guard
A
A2
guard
<Figure 7> Smart-Cell Repeater 850 Block Diagram
<Figure 8> 1900MHz Band Frequency
DL CENTER
CHANNEL
[MHz]
1931.25 25
1932.5 50
1933.75 75
1935 100
1936.25 125
1937.5 150
1938.75 175
1940 200
BAND
guard
E
guard
F
12
Verizon User Manual
Smart-Cell Repeater
DL CENTER
CHANNEL
[MHz]
1965 700
1966.25 725
1967.5 750
1968.75 775
1970 800
1971.25 825
1972.5 850
1973.75 875