Supplied Components; Removing The Covers - Nibe F1345 Installer Manual

Supplied components

W
I L
O
W L E Outdoor temper-
I L
K
O
L E
K
ature sensor
1 x
W
I L
O
W L E
I L K
O
L E
K
Safety valve
0.3 MPa (3 bar)
1 x
Tubes for sensors
4 x
Non-return valves
24 - 30 kW: 4 x
G2, internal
thread
40 - 60 kW: 2 x
G2, internal
thread
Aluminium tape
1 x
Location
The kit of supplied items is placed in packaging on top
of the heat pump.
10 Chapter 2 | Delivery and handling
Insulation tape
Temperature
1 x
sensor
5 x
O-rings
Current sensor
16 x
(not 60 kW)
3 x
Pipe insulation
Cable tie
8 x
Particle filter
24 - 30 kW: 4 pcs
External brine
G1 1/4 (internal
pump
thread)
(only for 40 and
40 - 60 kW: 2 pcs
60 kW)
G1 1/4 (internal
1 x
thread), 2 pcs G2
(internal thread)
Heat conducting
paste
3 x

Removing the covers

Front cover
1. Remove the screws from the lower edge of the front
panel.
2. Lift the panel out at the bottom edge and up.
Side panels
The side covers can be removed to facilitate the installa-
tion.
1. Remove the screws from the upper and lower edges.
2. Twist the cover slightly outward.
3. Move the hatch outwards and backwards.
4. Assembly takes place in the reverse order.
2
1
NIBE F1345