1. Manuals
  2. Brands
  3. Celsi Manuals
  4. Indoor Fireplace
  5. B-1001645
  6. User manual

Celsi B-1001645 User Manual

16” ultiflame inset electric fire
Hide thumbs
Table of Contents

Advertisement

Quick Links

16" Ultiflame Inset Electric Fire
Packing Checklist
 Electric Fire
 Remote Control Handset
 2 x AAA Batteries
 Log Set
 Ember Ice Set
 Instruction Manual
 Fascia
PLEASE READ THESE INSTRUCTIONS CAREFULLY BEFORE
INSTALLATION AND USE OF THIS ELECTRIC FIRE AND RETAIN FOR
This appliance is not intended for use by persons (including children) with
reduced physical, sensory or learning disabilities, or lack of experience
and knowledge, unless given supervision or instruction concerning use of
the appliance by a person responsible for their safety.
B-1001645
IMPORTANT
FUTURE REFERENCE.
Page 1

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the B-1001645 and is the answer not in the manual?

Questions and answers

Related Manuals for Celsi B-1001645

Summary of Contents for Celsi B-1001645

  • Page 1 16” Ultiflame Inset Electric Fire B-1001645 Packing Checklist  Electric Fire  Remote Control Handset  2 x AAA Batteries  Log Set  Ember Ice Set  Instruction Manual  Fascia IMPORTANT PLEASE READ THESE INSTRUCTIONS CAREFULLY BEFORE INSTALLATION AND USE OF THIS ELECTRIC FIRE AND RETAIN FOR FUTURE REFERENCE.

  • Page 2: Important Safety Advice

    IMPORTANT SAFETY ADVICE WHEN USING AN ELECTRICAL APPLIANCE, BASIC PRECAUTIONS SHOULD ALWAYS BE FOLLOWED TO REDUCE THE RISK OF FIRE, ELECTRIC SHOCK AND INJURY TO PERSONS, INCLUDING THE FOLLOWING IMPORTANT SAFETY ADVICE. DO NOT cover or obstruct the airflow to the front of the heater. This is to avoid over-heating of the product.

  • Page 3: Technical Specification

    Technical Specification Voltage 220v 240v AC 50HZ Fuse 13Amp Power Consumption General Power 20W to 1500W Heat output 750W to 1500W Flame Effect Only Unpacking Remove and discard the plastic bag. Be responsible when handling the packing materials. Keep the original packaging for future transportation and/or storage. Check all accessories are removed from the packaging before storing it away for future use.

  • Page 4: Installation

    Installation Installation must be carried out by a qualified and competent person. The fireplace opening size required to install the fire Height: 545 – 580mm Width: 400 – 460mm Depth: 75mm minimum Connect the appliance to single-phase AC supply of the voltage specified on the rating plate. Should the fire be connected directly into the mains supply, then a fused switched spur with a 13 amp fuse must be fitted.

  • Page 5: Fitting The Fascia

    Laying the Logs & Embers The Logs and the Ember Ice are packed in a box within the fire. Take care when unpacking the Logs and the Ember Ice. Scatter the Ember Ice over the Log Bed Base making sure the black and clear embers are mixed evenly.

  • Page 6: Operating The Fire

    Operating the Fire Manual Control This appliance can be operated manually using the controls situated under the upper canopy of the fire or by the included remote control handset. ON / OFF Power Switch This switch is used to turn the mains supply to the appliance ON or OFF. When the switch is in the ON position an indicator light located in the centre of the screen will glow amber for 10 seconds to indicate the appliance is switched on.

  • Page 7: Remote Control

    Remote Control Remove the battery cover on the back of the handset and insert 2 x AAA batteries ensuring the batteries are fitted correctly. Refit the battery cover. Ensure that the ON / OFF Power Switch on the fire is in the ON position. Point the remote control handset directly towards the fire and press the appropriate button to operate the fire.

  • Page 8: Maintenance Instructions

    IMPORTANT This appliance is fitted with an automatic thermal cut-out safety feature to reduce the risk of damage to appliance due to overheating. If the appliance overheats the heater element will cut out whilst the fan will still continue to run to allow the fire to cool down sufficiently. Once the appliance has cooled down the thermal cut-out will reset itself and switch the heater back on.

  • Page 9: Warranty

    Warranty In the unlikely event of a problem occurring due to a manufacturing fault within 24 months from the date of purchase of the appliance it will be repaired or replaced free of charge. This warranty does not cover consumable items which have a limited lifespan. If a problem should occur, the nature of the problem together with the date of purchase and installer information should be immediately reported to the retailer that the appliance was purchased from.

Table of Contents